The Key & Cable Company Cart

Parts

Harp plates for the minichord: twin rows of pads, piano keys, a zipper strip, framed strings and an arcade wheel
New: minichord

Harp plates for the minichord

New touch layouts that press on in place of the minichord's own harp plate, no tools needed. Seven designs are in stock and ship within a few days, $30 each: Twin Rows, Piano Keys, Framed Strings, Zipper 24, the Arcade Wheel, Drum Pads and Piano Glide, plus a few each of the Celtic Knot and Torus in green and the Tesseract in black.

More designs, from Fretless Wrap to the XY Pad to Veena, are made once enough people want them.

See the harp plates →

PCBs, potentiometers and other parts for the instruments and projects I build, the same ones that go into my own repairs and builds.

How ordering works

Add parts to your cart, then check out: pickup in Gainesville, or $9 shipping in the US. Pay with PayPal or Venmo on the next page. Harp plates can go in the same cart.

Once it's paid for, it ships within a few days. Outside the US, I'll email you the postage before you pay. Pickups and orders shipped to Florida add Florida sales tax.

Also on eBay

Some of my parts are also in my eBay store, which handles payment, shipping and buyer protection itself.

Available Parts

The new OM-84 strumplate flex PCB on the bench: amber film with the note contacts, the interleaved comb and the ribbon tail
Omnichord

OM-84 Strumplate Flex PCB

$40.00

A newly manufactured replacement for the circuit layer of the OM-84's strumplate: the note contacts and the interleaved 12V comb, on a 0.11 mm flex PCB with ENIG-plated contacts. It replaces the dead original under the conductive top layer, which is a separate part. Version 1.0, made from my open-source design files.

It's thin and delicate, so handle it by the edges. Rather have it fitted? That's the strumplate service.

Sold only here, not on eBay.

The new OM-27 strumplate flex PCB held in a hand: brown board with a long column of gold note contacts and comb, and an amber ribbon tail
Omnichord

OM-27 Strumplate Flex PCB

$40.00

A newly manufactured replacement for the circuit layer of the OM-27's strumplate: the note contacts and the interleaved 12V comb, on a flex PCB. It replaces the dead original under the conductive top layer, which is a separate part. Made from my open-source design files.

Handle it gently, by the edges. Rather have it fitted? That's the strumplate service.

Sold only here, not on eBay.

A new pair of green battery contact boards with springs, beside a corroded original pair
Omnichord

Omnichord Battery Contacts & Springs (Matching Pair)

$25.00 per pair

New replacement battery contact boards with springs, sold as a matching pair, for when the originals have corroded. Fits the Omnichord OM-27, OM-36 and OM-84.

Pick your model below: the OM-27 version has a longer cable and a different connector.

The reverse polarity protection board screwed down inside an OM-27, its power wires soldered on, with "Reverse Polarity Protection, The Key & Cable Company" on the silkscreen
Omnichord

Omnichord Reverse Polarity Protection Board

$25.00

One adapter with its polarity backwards can kill an Omnichord. This small board goes in behind the power jack and blocks a reversed adapter, so plugging one in does no harm. It's the same board I fit in the Omnichords I restore. Comes assembled, and fits the Omnichord OM-27, OM-36 and OM-84.

It guards against reversed polarity only, not an adapter of the wrong voltage. Fitting it means soldering inside the instrument. Rather have it fitted? That's the RPP install.

Sold only here, not on eBay.

The new dual potentiometer on its green adapter board and purple housing, held in a hand
Omnichord

Dual Potentiometer for the Omnichord OM-84

$30.00

A brand-new dual potentiometer for the Suzuki Omnichord OM-84.

OM-27 touchplates fitted to an Omnichord: one plate with columns of pads, one with long strips and a spiral
Circuit bending

OM-27 Touchplates

$100.00 per set

For circuit bending the Suzuki Omnichord OM-27: a set of circuit boards that gives you a multitude of touch-points to wire into the instrument. Designed by The Key & Cable Co. and not available anywhere else. I also circuit-bend OM-27s as a service: see Commissions.

Custom designs and custom colors are available, so get in touch for details. Watch a bent OM-27 in action.

Sold only here, not on eBay.

Close-up of an OM-84 touchplate: black board with bare metal touch pads and a spiral touch-point
Circuit bending

OM-84 Touchplates

$100.00 per set

For circuit bending the Suzuki Omnichord OM-84: a set of circuit boards that gives you a multitude of touch-points to wire into the instrument. Designed by The Key & Cable Co. and not available anywhere else. I also circuit-bend OM-84s as a service: see Commissions.

Custom designs and custom colors are available, so get in touch for details. Watch a bent OM-84 in action.

Sold only here, not on eBay.

The parts list is on its way. Until then, everything is in the eBay store, or text or email to ask about a part.

Looking for restored instruments? See Gear For Sale. Free printable tools and parts are on Resources. Giving one? There are gift cards.